Frame 5 MS 5001 1st & 2nd Stage Buckets / Blades
| ENGINE MODELS | N, P, R |
| ALLOY/MATERIAL | IN738LC Certified Master Heat per AMS 5410 |
| TRACABILITY | Each bucket serialized and traceable back to master heat |
| Investment Cast - fixed process | |
| HIP (Hot Isostatic Press) | |
| Heat Treat (Solution and Age) | |
| 100% FPI (Fluorescent Penetrant Inspection) | |
| 100% Radiographic Inspection | |
| 100% Dimensional/Visual Inspection | |
| MACHINING | 5-Axis Grinding; capable of holding tolerances to +/- 0.001" |
| 100% FPI | |
| 100% Dimensional Inspection of key characteristics | |
| HARD FACING | Coast Metal 64 (CM-64) |
| Abradable Coating | |
| DESIGN | Cutter Tooth Non Cutter Tooth |
| COATING | Uncoated |
| PEENING | Steel Shot per AMS 2430 |
| MOMENT WEIGH | Blades individually weighed, marked, and sequenced for installation |
| INSTALLATION HARDWARE | Per Engine Model or Customer Preference |
| PACKAGING | Shipping Containers meet ISPM 15 standards for export |
| WARRANTY | 8,000 hours of service or 18 months after delivery. DTL will replace the part due to casting or machining defects but is not responsible for consequential damages. |
| TERMS: | 20% time of order; 80% time of shipment |